how to drill a drain hole in a ceramic pot

how to drill a drain hole in a ceramic pot

How To Drill a Drain Hole in a Ceramic Pot

Drilling a drainage hole in a ceramic pot can seem like a daunting task, but it doesn’t have to be. With the right tools and a bit of know-how you can easily add a drainage hole to your pot with minimal effort. Read on and find out how!

What You Will Need

  • A ceramic pot
  • A masonry drill bit (ideally 4mm)
  • Safety glasses
  • Ear protectors
  • Masking tape
  • A piece of scrap wood
  • Hammer
  • Sponge
  • Rags


  • Step 1: Mark the spot. Use a pencil to mark out the spot on the pot where you would like the drainage hole to be. Stick a piece of masking tape over the mark to protect the pot and make it easier to drill.
  • Step 2: Set up the pot. Place a piece of scrap wood underneath the pot and make sure it’s on a flat surface as you won’t be able to change it once you start drilling. This will help to minimise the risk of cracking your pot.
  • Step 3: Wear protective gear. Put on your safety glasses and ear protectors before you begin drilling. The noise of a masonry drill bit is loud, so it’s best to be prepared.
  • Step 4: Drill the hole. Stabilise the drill against the pot. Start off slowly as it can take a bit of time for the drill bit to sink in. When the bit reaches the desired depth, turn off the drill and remove the bit.
  • Step 5: Clean up. Remove any debris from the pot and sponge off any excess dust. Wipe the pot down with a rag to make sure it’s clean and dry.


  • Tip 1: Make sure you don’t drill the hole too close to the edge of the pot. This could cause the pot to crack when the hole is made.
  • Tip 2: It’s always best to use a masonry drill bit specifically designed for drilling into ceramic or stone.
  • Tip 3: When selecting a size for your drill bit, aim for something slightly larger than your desired drainage hole. This will make it easier to fit a plug into the hole later if needed.


Drilling a drainage hole in ceramic pots doesn’t have to be complicated. With the right tool and the right know-how, it’s easy to make your pot drain properly. Just follow the simple steps in this article and you should have no problem adding a drain hole to your ceramic pot.